深部松软煤层钻孔孔周煤体变形产渣特征研究

针对煤矿井下高瓦斯软煤顺层长钻孔排渣困难、成孔率低、施工困难等问题,通过数值模拟实验研究了井下深部软煤体变形破坏特征,分析了顺层长钻孔孔周松软煤体变形特征及应力变化,以揭示顺层长钻孔孔周松软煤体变形产渣规律。研究表明:深部高瓦斯软煤顺层钻孔孔周煤体的应力平衡临界条件破坏后将发生大体积突然垮落;钻孔水平最大变形位移为1.22mm,垂直方向最大变形位移为10.7mm;径向孔周煤体垂向变形呈现逐渐减小趋势,且垂向变形明显大于钻孔水平变形。在水平方向上,钻孔孔周煤体应力分布呈现先增大再逐渐减小的变化规律,径向距离对水平应力分布的影响逐渐减小;随着径向距离的增加,钻孔孔周煤体应力分布逐渐降低,钻孔孔壁处煤体的应力出现最大值,且垂直方向处应力值最大。     

应用独立分量分析的激光测风雷达湍流频谱分解

针对大型风力发电机机组中常见的脉动湍流、风机尾流与涡流等湍流信号,研究了利用自然梯度下降的独立分量分析方法的湍流频谱分离效果,以区分中心风速与湍流信号,提高风机机组的综合工作效率。首先分析了风机组中常见湍流信号的后向散射与频谱分布特点,然后依据这些特点设计了对应的独立分量分析模型。在仿真结果符合要求的基础上,进行了双目激光雷达天线的风速采集与实际分离效果检测。实验结果表明,在大气折射率结构常数C2n≤10-14同时广义大气常数α≥4的通常情况下,利用双目信号能够分离出一个湍流中心和一个中心风速。对1 s内两个谱峰的波动范围进行统计,获得(2.59±0.05)MHz的中心风速以及(1.22±0.19)MHz的湍流中心估计,且二者的平均信噪比分别为25.93 dB和31.01 dB,能够在获得稳定的中心风速估计的同时得到一个较为稳定的湍流中心估计。     

Electrical conductivity of poly(vinyl alcohol)/carbon nanotube multilayer thin films: Influence of sodium polystyrene sulfonate mediated carbon nanotube dispersion

This investigation was aimed to enhance the dispersibility of multi-walled carbon nanotubes (MWCNT) using sodium polystyrene sulfonate (Na-PSS) polyelectrolyte. Subsequently, electrically conducting, multi-layer thin films are prepared utilizing layer by layer assembly method with poly(vinyl alcohol) as a host matrix. The highest extent of MWCNT dispersion was observed in MWCNT:Na-PSS ratio of 1:9 (wt/wt), which was estimated from UV-Vis spectroscopic analysis. Zeta potential measurements of Na-PSS modified MWCNT dispersion showed large negative potentials ranging from −52 to −64 mV in the most stable pH range of 4 to 10, suggesting the colloidal stability is due to the long-range repulsive nature of electrostatic interactions from negatively charged sulfonate groups. Complementary molecular dynamics simulations showed that adsorption of Na-PSS imparts a large negative potential to the carbon nanotube surface, which increases with an increase in Na-PSS concentration. The multi-layer thin film of (1:9) MWCNT:Na-PSS exhibited a DC electrical conductivity of 2.96 × 10² S/m.     

SG-5型PVC软树脂的研发与规模化生产

介绍了SG-5型PVC软树脂在调试过程中存在的问题和解决方法,试验过程中通过调整聚合温度、分散剂用量及比例、引发剂比例、搅拌转速等,制得既满足管材型材的使用要求、又尽可能倾向于软制品加工要求的SG-5型软树脂。     

垃圾焚烧炉炉排风量测量方法的比较研究

自动燃烧控制(ACC)系统是垃圾焚烧自动控制的核心技术。基于ACC系统原理,并结合垃圾焚烧炉在不同场景下的风量测量特点,分析了均速管流量计、双文丘里流量计、热式质量流量计等主流流量计的测量原理和优缺点,为垃圾焚烧发电厂流量计选型提供依据。     

基于多线结构光的弱纹理物体形貌测量方法

大多数现有的主流结构光测量装置在被测物体的表面上投射单条激光,通过移动装置实现物体表面的扫描重建。为了实现物体表面的在线快速重建,将多线结构光和双目立体视觉理论相结合,设计了一种新的三维测量方法。提出了一种结合形态滤波和Zhang-Suen细化算法的光条骨架提取方法和基于光条序列关系的光条匹配算法,并通过极线约束实现光条上特征点的精确匹配。通过实验验证了方法的有效性,相对误差在3%以内。     

3D Microstructures of Liquid Crystal Networks with Programmed Voxelated Director Fields

The shape-shifting behavior of liquid crystal networks (LCNs) and elastomers (LCEs) is a result of an interplay between their initial geometrical shape and their molecular alignment. For years, reliance on either one-step in situ or two-step film processing techniques has limited the shape-change transformations from 2D to 3D geometries. The combination of various fabrication techniques, alignment methods, and chemical formulations developed in recent years has introduced new opportunities to achieve 3D-to-3D shape-transformations in large scales, albeit the precise control of local molecular alignment in microscale 3D constructs remains a challenge. Here, the voxel-by-voxel encoding of nematic alignment in 3D microstructures of LCNs produced by two-photon polymerization using high-resolution topographical features is demonstrated. 3D LCN microstructures (suspended films, coils, and rings) with designable 2D and 3D director fields with a resolution of 5 µm are achieved. Different shape transformations of LCN microstructures with the same geometry but dissimilar molecular alignments upon actuation are elicited. This strategy offers higher freedom in the shape-change programming of 3D LCN microstructures and expands their applicability in emerging technologies, such as small-scale soft robots and devices and responsive surfaces.     

测量二次电子空间分布特征矩阵法的有效性分析

为了准确测量不同材料在实际环境中的二次电子空间分布，设计了一种新型的二次电子发射空间分布测量结构，给出了实验测量原理，用求解特征矩阵的方法对实验结果进行处理，得到了所需的二次电子空间分布。通过模拟计算对该测量方法进行了校验，模拟结果与假设二次电子空间分布函数相吻合，表明该测量方法可靠、测量精度高，为后续样机研制奠定了理论基础。     

综合物探手段在前道矿山勘查中的应用

介绍了高精度磁法测量和高密度电阻率法测量的原理,并将其应用在前道矿山勘查中。通过对数据解译圈定构造断裂两条,为矿区深部找矿提供了指导。为下一步勘探工作提供了依据。